Photoshop Lesson #7: How to draw a silver ring

Create a new image (width and height must be multiples of two in fact you'll see why. Also you should change the image mode to RGB). Fill the background in black. Now take the ruler markers at the top and left and place them in the center of the image. You should get a cross in the picture. Create a new layer.


Select "Elliptical Marquee tool", and then move your mouse above the place where the lines cross. Press and hold ALT + SHIFT keys, and then create a circle. Fill it with gray color. Repeat this, but make a second circle a slightly smaller diameter. Now, press DEL to cut the smaller diameter. Cancel the selection by pressing CTRL-D. You result should be a gray ring.


Press CTRL key and click on the layer where the ring is located. This step will mark up filled region of the ring. Go to [Select> Save selection]. Leave it settings default and click "ok". With the selected ring, go to the "Channels" and create a new channel. Leave the channel name default too. Fill the selected area in white, and deselect the choice(CTRL-D). Now you'll need to apply a blur filter [Filter> Blur> Guassian blur]. At the first pass use the filter 4, then 3 and then then 2.

Now go back to layer with a ring. Go to [Select> Load selection] to load the previously selected area. Go to [Filter> Render> Lighting effects]. In the "Texture channel", select your blur channel (it usually has a name "Alfa 2"). Other settigs are:
Intensity: 35
Focus: 69
Gloss: 69
Material: 69
Exposure: 0
Ambience: 8
Height: 80


In order to smooth the edges of your ring, press the CTRL-key and click on this layer in Layers list. Go to [Select> modify> Contract]. Select 1, and then click OK. Now invert the selection and press the DEL-key. You can also remove the "cross" because you don't need it anymore. Go to [Image> Adjust> Curves]. In order to get a realistic "silver effect" set the curves as shown on the picture below:


Now we need to add some color to our ring. Go to [Image> Adjust> Hue / Saturation]. For example a light yellow tint will create the effect of golden ring. This how-to can be used to create not only rings.

Photoshop Lesson #4: How to draw a nose

Step 1. Preparation. At first we should sketch the contours of the nose wings and nostrils. Use a clear line - we will smooth them later.
Do not place these elements on different layers, because it will be difficult to connect them to the rest of the skin on the face.

Step 2. Let's start. Illuminate mid-nose from the top to the place where it will be the nose tip. Shade the skin around the wings and under them as well as on the sides of the nose. Depending on the direction of the light obscure one side of the nose more than the other. Area under the nose tip (between the nostrils, but above them) must blur also. Illuminate the edges of the nostrils (this is not logical, but gives a more accurate form of nose). Also you can start to obscure the skin under the nose. All the operations above should be performed by using burn and dodge tools.

Step 3. Final. Increase the shadows level over processed areas, especially around the nose wings. Illuminate the tip of the nose. According to its type you can make even a bright reflection. If there is a flat nose, then you should not illuminate a lot. If it is large nose then you should do a flare bigger. Make a shadows on the rest of the skin around the nose. Imagine the approximate location of the eyes and mouth.

Note: It is not a complete tutorial with the tools list and step-by-step instructions. But I can say that you can get such a results using just burn tool and dodge tool. And remember: practice makes perfect :) Fell free to ask questions and leave comments.